WATER PUMP MODEL WP20

Water pump model WP20

The handy helper for a clean job in the garden. The water pump high pressure is optimally usable. This model pumps water through its 50 mm tube. The WP20 water pump has a pumping capacity of 500 liters per minute. With a consumption of approximately 0,395 l / h, the pump runs about 9 hours with a deposit lleno.Simplemente develop, install and get started! The water pump will help green areas, flower beds and water gardens. With an additional pre-filter, pump is also suitable for water from ponds, wells, cisterns, canals and streams. Also suitable for the operation of the lawn sprinklers.

Equipment: impulse engine four stroke petrol strong. capacity of about 30,000 l / h. bounded elevation (max.): ~ 28 meters. suction head (max.): ~ 8 meters. 3.0 "hose connections.

Technical data: Type: suction water pump Model: 4 stroke, one cylinder, air-cooled, OHV Displacement: 196 cm ³ Maximum benefit: 4.78 kW / 6.5 hp at 3,600 rev / min Fuel: Unleaded petrol Contents oil: 0.6 l tank volume / consumption: 3.6 l / 0,395 l / h bounded Elevation (max): 28 m Elevation bounded cont.: 23 m suction (max): 8 m. Capacity: approx. 60,000 l / h. Connections: 80 mm (3 inches) Pressure / sound power: 97 dB (Lpa) / 102 dB (LWA) Dimensions: 510 x 380 x 455 mm